Configure the network
- Print
- PDF
Configure the network
- Print
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
Available in Classic
This page describes how to set the rules for the SSL VPN IP pools on the ACGs.
Set ACG
You can set the rules for the SSL VPN IP pool on the ACG of the server you want to connect to through the SSL VPN. The following describes how to configure an ACG.
From the NAVER Cloud Platform console, click Services > Security > SSL VPN.
Check the SSL VPN IP pool to set the rules in ACG.
- In most cases, these IP addresses are assigned in 28-bit (16 ea ) blocks.
Click Services > Compute > Server.
Click ACG.
Select an ACG to set the rules for and click [Set ACG].
Select a protocol depending on the connection type and enter the access source (SSL VPN IP pool) and port and click [Add].
- The available protocols and port numbers by connection type are as follows:
Connection type Protocol Port no. ping ICMP - ssh TCP 22 Windows RDP TCP 3389 Click [Apply] and click [OK] in the notification pop-up window.
Was this article helpful?