Network settings
- Print
- PDF
Network settings
- Print
- PDF
Article Summary
Share feedback
Thanks for sharing your feedback!
Available in VPC
Network settings describes how to set rules for SSL VPN IP pools in the route table and ACG.
Set route table
You should set routing rules for SSL VPN IP pools in the route table applied to VPCs that will access SSL VPN. The following describes how to set routing rules to a route table.
- From NAVER Cloud Platform console, click the Services > Networking > VPC menus, in that order.
- Click the Route Table menu.
- Click and select the route table to set rules, and then click the [Set routes] button.
- When the Set route table pop-up window appears, click the [Create] button.
- Destination: Enter the SSL VPN IP pool
- You can check the SSL VPN IP pool in the email you received when you created the SSL VPN and in the IP pool on the SSL VPN screen.
- You can check the SSL VPN IP pool in the email you received when you created the SSL VPN and in the IP pool on the SSL VPN screen.
- Target Type: Select SSLVPN
- Target Name: Select SSL VPN to apply routing rules
- Destination: Enter the SSL VPN IP pool
- Click the [OK] button.
- Repeat steps 3. through 5. to set the same rule for all route tables applied to VPCs that will access the SSL VPN.
Note
For more information about route table, see VPC user guide.
Set ACG
You should set rules for the SSL VPN IP pool in the ACG of the server you want to connect to through SSL VPN. You can set rules to ACG as follows.
- From NAVER Cloud Platform console, click the Services > Compute > Server menus, in that order.
- Click the ACG menu.
- Click to select the ACG of the server you want to connect.
- You can check the ACG of the server you want to connect by clicking the server in the Services > Compute > Server > Server menu and then clicking the [Edit ACG] button.
- Click the [Set ACG] button.
- In the [Inbound] tab of the Set ACG rules, set rules for the SSL VPN IP pool.
- Protocol: : Select TCP
- Access source: Enter SSL VPN IP pool
- You can check the SSL VPN IP pool in the email you received when you created the SSL VPN and in the IP pool on the SSL VPN screen.
- You can check the SSL VPN IP pool in the email you received when you created the SSL VPN and in the IP pool on the SSL VPN screen.
- Allowed port: Enter the range of ports that require communication
- Click the [Add] button and then [Apply] button.
- When the Notification pop-up window appears, click the [Confirm] button.
Note
For more information about ACG, see ACG user guide.
Was this article helpful?