---
title: "Getting started"
slug: "vpc-start-vpc"
tags: ["VPC"]
updated: 2026-09-17T09:17:45Z
published: 2026-09-17T09:17:45Z
canonical: "guide.ncloud-docs.com/vpc-start-vpc"
stale: true
---

> ## Documentation Index
> Fetch the complete documentation index at: https://guide.ncloud-docs.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Getting started

Available in VPC

You can learn what you need to do to use Virtual Private Cloud (VPC) properly after reviewing the Virtual Private Cloud (VPC) environmental requirements and specifications and fully understanding the overall [quickstart](/docs/en/vpc-procedure-vpc) and [glossary](/docs/en/vpc-glossary-vpc). The details are as follows:

- How to create a VPC server in the NAVER Cloud Platform console
- How to create a subnet in an existing VPC

## Create VPC

To create a VPC in NAVER Cloud Platform console:

              Caution

              

This section briefly describes how to create a VPC server. For more information about how to create VPC, see [VPC creation guide](/docs/en/vpc-manage-vpc#VPC%EC%83%9D%EC%84%B1).

1. Access the NAVER Cloud Platform console.
2. In the top-right corner, click **Region & Platform**.
3. Select your Region and the **VPC** platform, then click **[Apply]**.
4. Navigate to **All Services** > **Networking** > **VPC**.
5. Click **[Create VPC]**.
6. Enter the VPC name and IP address range and click **[Create]**.
  - You cannot change the IP address range later, so choose it carefully.

## Create Subnet

To create a subnet within a VPC:

              Caution

              

This section briefly describes how to create a subnet. For more information about the full creation procedure, see [Subnet creation guide](/docs/en/vpc-subnetmanage-vpc#Subnet%EC%83%9D%EC%84%B1).

1. In the VPC environment of the NAVER Cloud Platform console, navigate to **Menu** > **All Services** > **Networking** > **VPC**.
2. Click the **Subnet Management** menu.
3. Click **[Create Subnet]**.
4. Enter the required information and click **[Create]**.