Upload shared data and set up data groups

Available in VPC

An administrator's account receives a guide mail upon creation of the Data Box Frame. After checking the guidance mail, access the NAVER Cloud Platform console and confirm the creation of the Data Box Frame. The Data Box Frame must be set up after the creation process has been completed. You can upload data for use by analysts through the Admin server provided by Data Box Frame. Through the data group settings, it is possible to use uploaded data in each box by providing the NAS loaded with the data.

1. Admin Server Access and Management

After connecting to the Admin server provided by Data Box Frame, you can load data on the public NAS. This section describes how to access the Admin server and manage it to resolve issues that may occur.

Admin server information and access

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
2. Click View or a tab at the top to view the detail interface of the frame that requires access.
   
3. Check the IP and connection information of the server starting with admin-* under the admin environment category.
   
4. Connect to the Admin server through the public IP you checked in the previous step.

Admin server management

Reboot server

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
2. Click View for the frame that requires a reboot.
3. Click Reboot Server under the Admin Environment category.
4. Make sure there are no ongoing tasks on the admin server, and click OK.

Reset password

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
2. Click View for the frame that requires a password reset.
3. Click Reset Password under the Admin Environment category.
4. After entering the new password, click OK.

Configure ACG rules for external access to admin environment

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
2. Click View for the frame that requires a reboot.
3. Click Set external → admin Environment Access ACG rule under the Admin Environment category.
4. Proceed with the ACG settings of the admin environment.

Configure ACG rules for admin environment ↔ data box

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
2. Click View for the frame that requires a reboot.
3. Click set admin environment ↔ data box ACG rule under the Admin Environment category.
4. Set ACG rules for communication between the admin environment and the data box.

2. Shared data upload

After accessing the Admin server, you can upload analysis target data that can be viewed by analysts to the public NAS. This section describes how to upload data after checking public NAS information.

NAS information check

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
2. Click View for the frame that requires a check.
   
3. Check the access information and specifications of the NAS under the Admin environment category.
   

NAS data upload

Upload the data to be analyzed to the target NAS through the Admin server information and NAS information.

NAS settings

Change NAS capacity

The section describes how to change the NAS capacity.

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
2. Click View for the frame that requires a change.
3. Click Change NAS capacity.
   
   • You can change the capacity between 500 GB and 10,000 GB and specify in 100 GB increments.
     
   • Enter the target capacity and click OK.

3. Configure data group

By using the data group settings, data uploaded to a public NAS can be provided to Data Box Frame. This section describes how to feed and block the data to be analyzed by adding and deleting data groups.

Add data group

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
   
2. Click Add data group.
   
   • Data group name: Name of the data group.
   • Data Box Frame to add: Select a Data Box Frame to add.
   • Volume of shared NAS to be included: Select shared NAS (minimum of 1 and maximum of 20 can be selected).
   • Data group description: Add a description for the data group.
3. Review the details, then click OK.

Delete data group

1. In the VPC environment on the NAVER Cloud Platform console, navigate to > Services > Big Data & Analytics > Data Box Frame > My Box Frame.
   
2. Click Delete data group.
   • If the button is not activated, check the usage status of the data group. You cannot delete a data group in use.
3. Click OK.
   • The data itself is not deleted. Delete it manually through the admin server.