Classic Path quickstart

Available in VPC

Once you've reviewed the Classic Path specifications, quickstart, and glossary, you're ready to start using the service. Your first step is subscribing to Classic Path. You submit requests for and manage the use of the Classic Path service in the NAVER Cloud Platform console.
The following items summarize what you learn in the starting guide:

• Create Classic Path
• Delete Classic Path

Create Classic Path

1. Access the NAVER Cloud Platform console.
2. Click Region & Platform component at the upper right of the console interface.
3. Select the Region in use and the VPC platform, and then click [Apply].
4. At the upper left of the console interface, Click the icon.
5. Navigate to Services > Networking > Classic Path.
6. Click [Create Classic Path].
7. Enter a name, select a VPC, and then click [Create].
   Caution

   To use Classic Path, you must create a VPC in the 10.36.192.0/19 IP range.

8. After creation, add a route configuration to the route table of the subnet that communicates with the Classic platform, and configure the ACG.
   • In the route configuration, set Destination to 10.0.0.0/8 and select Classic Path as the target type.

Delete Classic Path

1. Access the NAVER Cloud Platform console.
2. Click Region & Platform component at the upper right of the console interface.
3. Select the Region in use and the VPC platform, and then click [Apply].
4. At the upper left of the console interface, Click the icon.
5. Navigate to Services > Networking > Classic Path.
6. Click the [Classic Path Subscribed] drop-down list at the top.
7. Click [Deletion Classic Path].