Generating VPC and subnet

Prev Next

Available in VPC

Once you have checked the environmental requirements and the supported specifications of Ncloud Simple RabbitMQ and familiarized yourself with the use scenarios and glossary, you are now ready to start using Ncloud Simple RabbitMQ. The next thing for you to do is to generate VPCs and subnets for using Ncloud Simple RabbitMQ. You can generate VPCs and subnets, subscribe to Ncloud Simple RabbitMQ and manage your subscription on the NAVER Cloud Platform console.

Generating VPC

To generate a VPC, do the following:

Note

The following is a brief description of how to generate a VPC. For more information on VPC generation, see VPC use guide.

  1. Connect to the NAVER Cloud Platform console.
  2. In Region, click the Region you are using.
  3. In Platform, click the environment you are using.
  4. Click Services > Networking > VPC.
  5. Click [Generate VPC].
  6. Enter a VPC name and an IP address range.
    • Be careful when entering the IP address range since it cannot be edited later.
  7. Click [Generate].

Generating subnet

To generate a subnet, do the following:

Note

The following is a brief description of how to generate a subnet. For more information on subnet generation, see Subnet use guide.

  1. Click the environment you are using in the Region menu and Platform menu of the NAVER Cloud Platform console.
  2. Click Services > Networking > VPC > Subnet Management.
  3. Click [Generate Subnet].
  4. Enter subnet information.
    • Be careful when entering the information since it cannot be edited later.
  5. Click [Generate].